- Non-shading color technology
- Anti-cracks joints up to 7mm
- Water resistant High abrasion resistance
- Stain resistance Low shrinkage smooth finishing Large range of colors
- Mixing water ratio as per the data sheet
- Apply 24 hours minimum after standard tile adhesives application
- Apply 4 hours minimum after fast-setting tile adhesives application
- Apply 14 days minimum after tiling with traditional “site-mix” mortar on floors (minimum 3 days for walls)
- Substrate must be fully cured, set and dry prior to grouting
- All traces of oil or grease must be removed
- All loose particles of mortar or tile adhesive in the groove must be physically removed (joints should be emptied to at least 2/3 of the tile thickness)
- Avoid excess of water while cleaning to prevent discoloration of joints
- It is recommended to use a moist sponge rather than excessive water pouring for cleaning the tiles and the dried grouts
- Do not spray water under high pressure and avoid using any chemical cleaning agent on the grout until 3 days after the application
Reviews
There are no reviews yet.