SikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:
- Easy to mix
- Good flow characteristics
- Non-shrink
UsageSikaGrout®-520 is used for grouting in the following:
|
AdvantagesSikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:
|
Packaging25 kg bag |
ColourGrey Powder |
Product Information↓
CompositionPortland cement, selected fillers and aggregates, special additives Shelf life12 months from date of production Storage conditionsStore in original unopened packaging in cool and dry condition between +5°C and +35°C. Protect from direct sunlight, heat and moisture. Maximum grain size~5 mm |
Technical Information↓
Compressive strength
w/p ratio = 0.18 (4.5 L water / 25 kg) |
Application Information↓
Fresh mortar density~2.27 kg/l (+25 °C) Layer thicknessMin. 10 mm per layer Ambient air temperature+5 °C min. / +35 °C max. Mixing ratio
Substrate temperature+5 °C min. / +35 °C max. |
Consumption↓
Yield~13 L / 25 kg bag |
Application steps
MIXINGAdd water according to above mentioned ratio into a clean mixing vessel before slowly adding the SikaGrout®-520 powder. SikaGrout®-520 is best mixed in a forced action mixer, for 2 to 3 minutes or until the mix is free of lumps, not longer than 5 minutes. Slow speed drill (maximum 500 rpm) can be also used for mixing. Normal tumble type concrete mixers are not suitable. Do not add extra water or other ingredients. Mix only full bags for best results. APPLICATIONBefore pouring, let the mixed grout stand for approximately 5 minutes after mixing to allow entrapped air to escape. Pour into the prepared area in a way that the grout has the shortest distance to travel. Ensure that air displaced by the grout is allowed to escape. When carrying out base plate grouting, ensure a sufficient head of pressure is maintained to keep the mortar flowing. All exposed areas of the mortar surface should be kept as small as possible. CURING TREATMENTTreatment of exposed surfaces with Sika® Antisol® range curing compound, is highly recommended for large areas of application. Use other approved curing methods such as polyethylene sheeting or wet hessian only for small exposed areas. Do not commence fogging until final set has been reached. CLEANING OF EQUIPMENTClean equipment and mixer immediately after application with water. Hardened material can only be removed mechanically. |
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
SikaGrout 520
11,00 د.إ
High Strength, Non-shrink Cementitious, General Purpose Grout
SikaGrout®-520 is a cementitious, free flowing, general purpose, non-shrink precision grout.
Suitable for use in hot and tropical climatic conditions.
SikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:
- Easy to mix
- Good flow characteristics
- Non-shrink
UsageSikaGrout®-520 is used for grouting in the following:
|
AdvantagesSikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:
|
Packaging25 kg bag |
ColourGrey Powder |
Product Information↓
CompositionPortland cement, selected fillers and aggregates, special additives Shelf life12 months from date of production Storage conditionsStore in original unopened packaging in cool and dry condition between +5°C and +35°C. Protect from direct sunlight, heat and moisture. Maximum grain size~5 mm |
Technical Information↓
Compressive strength
w/p ratio = 0.18 (4.5 L water / 25 kg) |
Application Information↓
Fresh mortar density~2.27 kg/l (+25 °C) Layer thicknessMin. 10 mm per layer Ambient air temperature+5 °C min. / +35 °C max. Mixing ratio
Substrate temperature+5 °C min. / +35 °C max. |
Consumption↓
Yield~13 L / 25 kg bag |
Application steps
MIXINGAdd water according to above mentioned ratio into a clean mixing vessel before slowly adding the SikaGrout®-520 powder. SikaGrout®-520 is best mixed in a forced action mixer, for 2 to 3 minutes or until the mix is free of lumps, not longer than 5 minutes. Slow speed drill (maximum 500 rpm) can be also used for mixing. Normal tumble type concrete mixers are not suitable. Do not add extra water or other ingredients. Mix only full bags for best results. APPLICATIONBefore pouring, let the mixed grout stand for approximately 5 minutes after mixing to allow entrapped air to escape. Pour into the prepared area in a way that the grout has the shortest distance to travel. Ensure that air displaced by the grout is allowed to escape. When carrying out base plate grouting, ensure a sufficient head of pressure is maintained to keep the mortar flowing. All exposed areas of the mortar surface should be kept as small as possible. CURING TREATMENTTreatment of exposed surfaces with Sika® Antisol® range curing compound, is highly recommended for large areas of application. Use other approved curing methods such as polyethylene sheeting or wet hessian only for small exposed areas. Do not commence fogging until final set has been reached. CLEANING OF EQUIPMENTClean equipment and mixer immediately after application with water. Hardened material can only be removed mechanically. |
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
Reviews
There are no reviews yet.
- Free shipping on all orders above 50,00
- No hassle returns, 30 days return
- Next day delivery within your country
Feel free to Get in touch
Related products
SikaGrout 520
11,00 د.إ
Reviews
There are no reviews yet.