UsageSikaEmaco® N 202 can be used as a:
|
Advantages
|
Product Details
Composition
Polymer containing cementitious mortar with different additives
Shelf life
12 months from production date.
Storage conditions
Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5°C and +35°C. Protect from direct sunlight, heat and moisture.
Maximum grain size
~0.6 mm
Compressive strength
|
≥ 15 N/mm2 (28 d, w/p ratio=0.24) |
(ASTM C109) |
Tensile adhesion strength
|
≥ 0.8 N/mm2 (28 d) |
(ASTM D4541) |
Application
Mixing ratio
Max. 6 litres of water per 25 kg bag
Layer thickness
Max. 3.0 mm in one single layer
Ambient air temperature
+5°C min. / +35°C max.
Substrate temperature
+5°C min. / +35°C max.
Application time
~60 min (25°C)
Initial set time
~90 min (25°C)
Fresh mortar density
~1.85 kg/l (25°C)
Yield
~16.7 litres per 25 kg bag
MIXING
SikaEmaco® N 202 can be mixed with a low speed (< 500 rpm) hand drill mixer or using a force action mixer. Pour the recommended water amount in a suitable, clean mixing container. While stirring slowly, add the powder to the water and mix thoroughly at least for 3 minutes to acheive required homogeneous consistency. The obtained mix should be very creamy, easily spreadable and thixotropic. Do not add extra water or other ingredients after mixing.
Normal tumble type concrete mixers are not suitable.
Do not mix more material than can be placed within its pot life.
APPLICATION
SikaEmaco® N 202 can be applied by brush, trowel or spatula. As soon as the mortar has started to set it can be smoothed by wooden or synthetic float, XPS block or sponge.
CURING TREATMENT
Where ambient conditions may lead to rapid surface drying, the use of light water fogging for 48 hours or application of a suitable water based curing compound from Sika® Antisol® range is recommended. Do not commence fogging until final set has been reached.
CLEANING OF EQUIPMENT
Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
SikaEmaco N 202 (Formerly known as MasterEmaco N 202)
16,00 د.إ
SINGLE COMPONENT, POLYMER MODIFIED BLOWHOLE FILLER AND FINISHING MORTAR
SikaEmaco® N 202 is a cementitious, polymer modified one component blowhole filler and finishing mortar.
Suitable for use in hot and tropical climatic conditions.
- Easy to use
- Excellent workability
- Good mechanical strengths
UsageSikaEmaco® N 202 can be used as a:
|
Advantages
|
Product Details
Composition
Polymer containing cementitious mortar with different additives
Shelf life
12 months from production date.
Storage conditions
Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5°C and +35°C. Protect from direct sunlight, heat and moisture.
Maximum grain size
~0.6 mm
Compressive strength
|
≥ 15 N/mm2 (28 d, w/p ratio=0.24) |
(ASTM C109) |
Tensile adhesion strength
|
≥ 0.8 N/mm2 (28 d) |
(ASTM D4541) |
Application
Mixing ratio
Max. 6 litres of water per 25 kg bag
Layer thickness
Max. 3.0 mm in one single layer
Ambient air temperature
+5°C min. / +35°C max.
Substrate temperature
+5°C min. / +35°C max.
Application time
~60 min (25°C)
Initial set time
~90 min (25°C)
Fresh mortar density
~1.85 kg/l (25°C)
Yield
~16.7 litres per 25 kg bag
MIXING
SikaEmaco® N 202 can be mixed with a low speed (< 500 rpm) hand drill mixer or using a force action mixer. Pour the recommended water amount in a suitable, clean mixing container. While stirring slowly, add the powder to the water and mix thoroughly at least for 3 minutes to acheive required homogeneous consistency. The obtained mix should be very creamy, easily spreadable and thixotropic. Do not add extra water or other ingredients after mixing.
Normal tumble type concrete mixers are not suitable.
Do not mix more material than can be placed within its pot life.
APPLICATION
SikaEmaco® N 202 can be applied by brush, trowel or spatula. As soon as the mortar has started to set it can be smoothed by wooden or synthetic float, XPS block or sponge.
CURING TREATMENT
Where ambient conditions may lead to rapid surface drying, the use of light water fogging for 48 hours or application of a suitable water based curing compound from Sika® Antisol® range is recommended. Do not commence fogging until final set has been reached.
CLEANING OF EQUIPMENT
Clean all tools and application equipment with water immediately after use. Hardened / cured material can only be mechanically removed.
There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.
Reviews
There are no reviews yet.
- Free shipping on all orders above 50,00
- No hassle returns, 30 days return
- Next day delivery within your country
Feel free to Get in touch
Related products
SikaEmaco N 202 (Formerly know...
16,00 د.إ
Reviews
There are no reviews yet.