UsageSika® Separol® RL 225 is formulated for application to plywood, timber, steel and plastic faced formwork and moulds, prior to casting concrete, to ensure a clean release. |
Advantages
|
Product Details
Shelf life
12 months from date of production if stored properly
Storage conditions
Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5°C and +50°C. Mix well before using.
Density
~0.97 kg/l (+25°C)
Total chloride ion content
|
Nil |
(EN 934-2) |
Application
Consumption
30 – 40 m2/l when spray applied depending on smoothness and porosity of the formwork used.
Coverage is considerably enhanced on marine ply and steel faced forms.
APPLICATION
Apply before the first casting and thereafter re-apply immediately after stripping and cleaning the mould.
Lightweight horticultural sprayers are ideal as Sika® Separol® RL 225 is finely atomised to give a uniform coating. Excessive application should be avoided.
Alternatively, application may be made by a fine haired brush, only a very thin coating should be made and any excess removed.
If after the first application, the Sika® Separol® RL 225 is completely absorbed into new timber or plywood, a further application should be made before filling the moulds or formwork.
CLEANING OF EQUIPMENT
Sika® Separol® RL 225 may usually be left in spray guns or sprayers without detriment, but with certain types, there may be some softening of rubber seals with prolonged contact.
Reviews
There are no reviews yet.