Free Exchange of products within 30 days
Premium Brand Items for an affordable price

+97126904446

support@toolstoreae.shop

Menu Categories

+30 (0) 1234 56789

support@example.com

SikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:

  1. Easy to mix
  2. Good flow characteristics
  3. Non-shrink

Usage

SikaGrout®-520 is used for grouting in the following:

  1. Columns in pre-cast construction
  2. Cavities, gaps and recesses
  3. Base plates
  4. General concrete repairs

Advantages

SikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:

  1. Easy to mix
  2. Good flow characteristics
  3. Non-shrink
  4. Early strength development even at flowable consistency
  5. Non-corrosive
  6. Pumpable

Packaging

25 kg bag

Colour

Grey Powder

Product Information↓

Composition

Portland cement, selected fillers and aggregates, special additives

Shelf life

12 months from date of production

Storage conditions

Store in original unopened packaging in cool and dry condition between +5°C and +35°C. Protect from direct sunlight, heat and moisture.

Maximum grain size

~5 mm

Technical Information↓

Compressive strength

1 day

~25 N/mm2

3 days

~40 N/mm2

7 days

~50 N/mm2

28 days ~60 N/mm2

w/p ratio = 0.18 (4.5 L water / 25 kg)

Application Information↓

Fresh mortar density

~2.27 kg/l (+25 °C)

Layer thickness

Min. 10 mm per layer
Max. 80 mm per layer

Ambient air temperature

+5 °C min. / +35 °C max.

Mixing ratio

Consistency

Water per 25 kg bag

Water/Powder Ratio

Flowable 4.5 L 0.18

Substrate temperature

+5 °C min. / +35 °C max.

Consumption↓

Yield

~13 L / 25 kg bag

Application steps

MIXING

Add water according to above mentioned ratio into a clean mixing vessel before slowly adding the SikaGrout®-520 powder. SikaGrout®-520 is best mixed in a forced action mixer, for 2 to 3 minutes or until the mix is free of lumps, not longer than 5 minutes. Slow speed drill (maximum 500 rpm) can be also used for mixing. Normal tumble type concrete mixers are not suitable. Do not add extra water or other ingredients. Mix only full bags for best results.

APPLICATION

Before pouring, let the mixed grout stand for approximately 5 minutes after mixing to allow entrapped air to escape. Pour into the prepared area in a way that the grout has the shortest distance to travel. Ensure that air displaced by the grout is allowed to escape. When carrying out base plate grouting, ensure a sufficient head of pressure is maintained to keep the mortar flowing. All exposed areas of the mortar surface should be kept as small as possible.

CURING TREATMENT

Treatment of exposed surfaces with Sika® Antisol® range curing compound, is highly recommended for large areas of application. Use other approved curing methods such as polyethylene sheeting or wet hessian only for small exposed areas. Do not commence fogging until final set has been reached.

CLEANING OF EQUIPMENT

Clean equipment and mixer immediately after application with water. Hardened material can only be removed mechanically.

Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.

Reviews

There are no reviews yet.

Be the first to review “SikaGrout 520”

Your email address will not be published. Required fields are marked

SikaGrout 520

11,00 د.إ

34 people are viewing this product right now
🔥 8 items sold in last 3 hours

High Strength, Non-shrink Cementitious, General Purpose Grout

SikaGrout®-520 is a cementitious, free flowing, general purpose, non-shrink precision grout.
Suitable for use in hot and tropical climatic conditions.

Estimated delivery:4 days

SikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:

  1. Easy to mix
  2. Good flow characteristics
  3. Non-shrink

Usage

SikaGrout®-520 is used for grouting in the following:

  1. Columns in pre-cast construction
  2. Cavities, gaps and recesses
  3. Base plates
  4. General concrete repairs

Advantages

SikaGrout®-520 is an economical and easy to use grout requiring only the addition of water. It offers the following beneficial properties:

  1. Easy to mix
  2. Good flow characteristics
  3. Non-shrink
  4. Early strength development even at flowable consistency
  5. Non-corrosive
  6. Pumpable

Packaging

25 kg bag

Colour

Grey Powder

Product Information↓

Composition

Portland cement, selected fillers and aggregates, special additives

Shelf life

12 months from date of production

Storage conditions

Store in original unopened packaging in cool and dry condition between +5°C and +35°C. Protect from direct sunlight, heat and moisture.

Maximum grain size

~5 mm

Technical Information↓

Compressive strength

1 day

~25 N/mm2

3 days

~40 N/mm2

7 days

~50 N/mm2

28 days ~60 N/mm2

w/p ratio = 0.18 (4.5 L water / 25 kg)

Application Information↓

Fresh mortar density

~2.27 kg/l (+25 °C)

Layer thickness

Min. 10 mm per layer
Max. 80 mm per layer

Ambient air temperature

+5 °C min. / +35 °C max.

Mixing ratio

Consistency

Water per 25 kg bag

Water/Powder Ratio

Flowable 4.5 L 0.18

Substrate temperature

+5 °C min. / +35 °C max.

Consumption↓

Yield

~13 L / 25 kg bag

Application steps

MIXING

Add water according to above mentioned ratio into a clean mixing vessel before slowly adding the SikaGrout®-520 powder. SikaGrout®-520 is best mixed in a forced action mixer, for 2 to 3 minutes or until the mix is free of lumps, not longer than 5 minutes. Slow speed drill (maximum 500 rpm) can be also used for mixing. Normal tumble type concrete mixers are not suitable. Do not add extra water or other ingredients. Mix only full bags for best results.

APPLICATION

Before pouring, let the mixed grout stand for approximately 5 minutes after mixing to allow entrapped air to escape. Pour into the prepared area in a way that the grout has the shortest distance to travel. Ensure that air displaced by the grout is allowed to escape. When carrying out base plate grouting, ensure a sufficient head of pressure is maintained to keep the mortar flowing. All exposed areas of the mortar surface should be kept as small as possible.

CURING TREATMENT

Treatment of exposed surfaces with Sika® Antisol® range curing compound, is highly recommended for large areas of application. Use other approved curing methods such as polyethylene sheeting or wet hessian only for small exposed areas. Do not commence fogging until final set has been reached.

CLEANING OF EQUIPMENT

Clean equipment and mixer immediately after application with water. Hardened material can only be removed mechanically.

Order by 2PM to get delivered next working day! We use 24 hours service with carriers in most cases so that you can get your order delivered on time.

There is £4.99 charge for delivery under £50 Orders. Additional charges will be imposed by our couriers for delivery to remote area, a surcharge may be levied to cover carriage to these areas.

Reviews

There are no reviews yet.

Be the first to review “SikaGrout 520”

Your email address will not be published. Required fields are marked

or
SKU: masterflow-520-parent Categories:
Got Questions?
Feel free to Get in touch
SikaGrout 520

11,00 د.إ

Select options